[ad_1]
The Vaporesso Swag PX80 is the third of the Vaporesso Swag line, and it’s the one Swag pod mod.
What I like most about that, is most manufactures would have used the very same design and form however changed the 510 reference to a pod connection however not right here, it’s a very new mod.
The unique Vaporesso Swag equipment was launched in early 2018 and the Swag 2 got here in early 2019, so we’ve bought a pleasant evenly unfold vary, which is sweet to see. FYI the Swag vary to this point has been an ideal success, so lets hope for extra Vaporesso goodness.
Vaporesso Launched in 2015, its mission is to make vapes which have an ideal style focus, straightforward and protected to make use of whereas feeling and looking nice.
In the event you for some cause have by no means heard of the Swag kits, you will have heard of Vaporesso’s Gen, Luxe, or any of the Goal kits.
What Can We Count on From The Vaporesso Swag PX80?
The very first thing I at all times ask is what’s the facility state of affairs? The Vaporesso Swag takes an exterior 18650, powers from 5w to 80w and take a 2A USB-C charger.
My favorite factor in regards to the mod is the embedded display screen. At first I had no concept what that meant, however it truly means the display screen is hidden…so cool!
The GTX coils are fairly well-liked, so I’m certain many individuals shall be glad to know it’s GTX appropriate and due to the Axon chip it may hearth in 0.001 seconds, apparently.
It has Quad Leak safety and you may change the coils with out it loosing your entire liquid.
Did I point out it additionally has a brilliant easy and genius, adjustable airflow?
Inside The Field
- Swag PX80 Mod
- Swag Pod
- GTX 0.2ohm Mesh Coil
- GTX 0.3ohm Mesh Coil
- USB-C Charger Cable
- Person Handbook
- Guarantee Card
- Reminder
I Additionally obtained a pack of GTX 0.8ohm Mesh Coils and a pack of GTX 0.6ohm Mesh Coil.
Vaporesso Swag PX80 Specs
- Measurement: 99.7 x 24.1 x 47.7mm
- Pod capability: 4ml (2ml TPD)
- Battery: exterior 18650
- Energy Output: 5-80W
- Charging: 2A USB-C
- Show: hidden 0.96″ TFT display screen
Vaporesso Swag PX80 Options
- Adjustable Airflow
- E-liquid Move Management
- GTX Coil appropriate
- AXON Chip
- Quad Leakage Safety
Design & Construct High quality
I truly obtained 2 of those kits, one in black and one in purple.
Though I used to be genuinely torn between the 2, I selected the purple one for a change, as a result of I at all times go for black.
As you’ll be able to see, the equipment is available in 5 totally different colors and it appears superior in every.
The Vaporesso Swag PX80 Mod
For such a little bit wanting factor, the Vaporesso Swag PX80 mod is so properly designed. The one approach to describe it in single phrases can be compact and good-looking.
I.. I… I’m certain I can’t do it justice in how superior this factor appears!
On one aspect is a padded leather-based patch, which appears fairly cool, it’s a hexagon or gem form. I recognize that further little little bit of effort within the design.
The reverse aspect is what appears like a easy carbon fibre sticker, nevertheless beneath that carbon fiber ‘sticker’ is the display screen, we simply can’t see it when it isn’t lit up.
On the opposite aspect is the fireplace button, energy adjustment buttons and the USB-C port, the reverse aspect to that has been left empty.
The Vaporesso Swag PX80 Buttons
The fireplace button on the Vaporesso Swag PX80 is kind of small, measuring at 10mm in diameter, however it may’t be a lot greater with out protruding out the perimeters.
It has a radial grip sample and it does swimsuit the mod properly.
Sadly the fireplace button does have a rattle to it, which was fairly disappointing.
The facility adjustment buttons don’t rattle although and though they’re small they swimsuit the mod and are nonetheless fairly straightforward to press.
Vaporesso Swag PX80 Display screen
In the event you haven’t already seen, I’m an enormous fan of the hidden display screen, it’s so cool!
However does it work?
Sure, it really works, rather well.
Whereas the display screen is off you can’t see it in any respect, not even the boarder and whereas it’s on you’ll be able to’t see the ‘carbon fibre‘ and even higher the display screen is crisp and contemporary.
Okay, my digital camera picked up the sample, however I promise, with the bare eye, you’ll be able to’t inform it’s there.
Up within the high left nook we’ve the battery degree indicator, which is comprised of 5 segments however doesn’t have a proportion.
Within the high proper is the facility mode ‘S’ for Good wattage, ‘V’ for Variable Voltage or ‘W’ for Variable Wattage.
Simply above the center on the display screen is the facility setting and beneath that may be a funky wanting bar chart factor… I don’t suppose it truly supplies any info, however it dances round when the mod is firing.
Within the backside half is all the data regarding the coil and energy. First off is the ‘Best’ energy advice for the coil you’re utilizing, beneath that’s the resistance and voltage, with the puff counter and timer on the very backside.
I’ll say it once more, I’m a fan!
In the event you don’t just like the inexperienced color, worry not, it has changeable themes so you’ll be able to select between Inexperienced, Blue or Pink.
Vaporesso Swag PX80 Battery Location
The battery is situated along side the pod, beneath the battery cap, I’ve to say that is considered one of my favorite varieties.
In comparison with different ‘battery doors’ it has a brilliant low likelihood of breaking and the mix of the knurled grip and good threads, it’s tremendous straightforward to make use of.
Though I’d be complaining if the mod had a 510 connection, as a result of it limits the potential tank dimension however that isn’t actually a priority as a result of it’s a pod mod.
Vaporesso Swag PX80 Pod Mod Connection
The pod has a round psychological base, and is held in by 4 magnets which can be positioned contained in the pod port, it holds it fairly agency.
There’s 2 spring loaded pins simply of middle and there isn’t actually rather more to say…
Oh wait no, there’s a half that’s genius however but so easy. I don’t know the way all the opposite designers missed it!
The airflow management, includes of an airflow gap on both aspect of the pod, already that’s a bit totally different as a result of the airflow normally simply goes below the pod to the coil.
Which are additionally matching airflow holes on the mod, so all you need to do to alter the airflow is twist the pod.
When the airflow is correctly matched up the airflow is absolutely open, from there, the extra you twist it the extra it’s going to shut.
Vaporesso Swag PX80 Pod
So we’ve already mentioned just a few methods the pod is totally different to different pods (steel base and airflow inlet), apart from that it simply appears like one other pod mod pod.
Though most pod mod pods seem like tanks today, with how the ‘top cap’ and mouth piece is fashioned on the PX80 pods, it give it that further ‘tank look’.
There’s another factor we haven’t mentioned although, the coil system.
To ensure that the pod to have airflow inlets the coils should be flush to the underside of the pod, which they’re… So, how are you supposed to drag the coil out should you can’t seize it? You don’t, you push it out!
Once you push a coil in, it pushes the mouthpiece up, then you definately twist the mouthpiece to lock it in place. When it’s time to alter the coil, merely simply twist the mouthpiece to unlock it and push it down, to push the coil out.
I find it irresistible, it appears cool, works properly and there isn’t something to go flawed, like springs.
The Vaporesso Swag PX80 Mouth Piece
The Vaporesso Swag PX80 mouth piece stands at 11mm tall and has a slight conical form to it.
Though it’s inbuilt I fairly prefer it.
Utilizing The Vaporesso Swag PX80
Altering The GTX Coils
The pods don’t include coils pre-installed, so we’ll begin there…
- Take away the pod from the mod and switch the other way up
- Push the coil into the bottom of the pod till it’s flush with the underside
- Twist the mouth piece to lock, as indicated on the highest
- Fill with e-liquid and depart to soak for 4-5 minutes
To take away the coil…
- Twist the mouth piece to unlock, as indicated on the highest
- Push the mouth piece down
- Pull and take away the coil from the underside of the pod
Vaporesso Swag PX80 How To Fill
- Take away the pod from the mod and switch the other way up
- Elevate up the rubber seal from the underside of the pod
- Fill by means of the fill gap
- Reinsert Rubber Seal and put the pod again on the mod
Vaporesso Swag PX80 Operation
- Energy On/Off = Fireplace button 5 instances inside 2 seconds
- Alter energy= ‘+’ or ‘-‘
- Lock/unlock = Fireplace button 3 instances shortly
- Menu / change energy mode= press ‘+’ and ‘-‘ at the same time, use ‘+’ or ‘-‘ to navigate and hearth button to pick out
How Does The Vaporesso Swag PX80 Package Carry out?
I used Untold Chapter 2: Sweet Tide for each coils, it’s combined at 70VG/30Pg, however is kind of skinny for a excessive VG liquid.
Once I each began utilizing the coils, the flavour was scarce and the vapour was fairly harsh.
In the event you’re experiencing the identical, keep it up a bit, it does get higher.
GTX 0.2ohm Mesh Coil
The beneficial wattage for this coil is 45-60w. In good custom, we’ll begin down low at 35W and it isn’t dangerous.
With the airflow absolutely open, a protracted drag offers us a small cloud and a touch of flavour, a little bit of heavy diluted cordial pop, however for 10w below the beneficial, it’s spectacular.
45w is the underside of the beneficial vary, and the flavour is extra distinguished however it’s nonetheless extra of an undertone, it’s probably not fulfilling or satisfying, and the cloud dimension continues to be medium.
52.5w is half means by means of the beneficial vary and I’m nonetheless not feeling fulfilled, it is extremely distinguished however it’s simply not filling the mouth with flavour.
It’s not horrible, particularly for 52.5w however it’s not spectacular both. As you’d anticipate the cloud has grown a little bit bit too.
60W is the highest of the beneficial wattage and should you don’t draw as quick as you’ll be able to, however take a pleasant large puff with the airflow absolutely open, you get a satisfying flavour, nonetheless not raving about it although, and the cloud is a thick medium dimension.
GTX 0.3ohm Mesh Coil
The beneficial wattage for this coil is 32-45w. In good custom, we’ll begin down low at 25w and it’s surprisingly good (for 25w).
Once more I personally suppose it’s higher with the airflow absolutely open. Though it’s not on each puff, it does typically give a distinguished flavour in the back of the throat. Whereas the vapour manufacturing is a small cloud.
Upto the minimal beneficial wattage, 32w offers an okay style, however it appears to be distorting the flavour a good bit. At this level I’d solely been utilizing this coil for a day and thought it might be as a result of the liquid is just too thigh, though as I discussed, it’s fairly skinny.
So I modified the liquid to Obtained Salt Peachy Promise (50VG/50PG Nic-Salt). Sadly that didn’t style fairly proper both.
The flavour didn’t get a lot better, so we’ll skip to 45W, which is the highest beneficial wattage. Though the flavour nonetheless tastes a bit distorted, it’s certainly distinguished and it offers off a pleasant thick medium sized cloud.
GTX 0.6ohm Mesh Coil
This coil doesn’t include the equipment however Vaporesso despatched a pack.
The beneficial wattage for this coil is 20-30W and I’m utilizing it with the Obtained Salts Peachy Promise.
Down at 20w, it does properly, the vapour is thick sufficient however until you’re taking a protracted sluggish drag it’s barely a cloud.
As you go up by means of the wattage the flavour enhances properly and so does the vapour manufacturing.
Once you get to 30w the coil kicks out a pleasant flavour, it’s fairly spectacular for 30w and also you get a small cloud.
All through, this coil supplied an ideal MTL flavour.
GTX 0.8ohm Mesh Coil
This coil doesn’t include the equipment however vaporesso despatched a pack.
The beneficial wattage for this coil is 12-20W.
Down at 12w, it performs higher [in my opinion] with the airflow absolutely open and getting used Mouth To Lung and it’s tremendous good and distinguished in the back of the throat, offering a cigarette like quantity of vapour.
Once you get to 20w the flavour begins to be recognisable Direct To Lung however it’s nonetheless higher at MTL offering a very nice and distinguished flavour.
Vaporesso Swag PX80 Battery Life
The Vaporesso Swag PX80 takes an exterior battery and the commonest 18650s are normally 2500mAh or 3000mAh which isn’t dangerous for this kind of machine, particularly for it’s dimension.
It does include 2A USB-C charging, which might cost a 3000mAh battery in about 1hour and a half however I at all times choose to make use of a battery charger as a result of they are typically safer and higher for batteries.
Nonetheless utilizing a battery charger, at all times provide the perk of with the ability to cost a second battery when you’re utilizing one.
The two coils that got here with equipment has a beneficial wattage span of 32-60W so lets check out what you’ll be able to anticipate from a 3,000mAh battery.
- 32W = 624 x 2 second puffs or a 2 second puff each different minute for 20.5 hours
- 46W = 434 x 2 second puffs or a 2 second puff each different minute for 14 hours
- 60W = 333 x 2 second puffs or a 2 second puff each different minute for 11 hours
Vaporesso Swag PX80 Does It Leak?
The Vaporesso Swag PX80 has “Quad Leak Protection”… however what precisely does that imply?
Merely put the PX80 has 3 O-rings to forestall leaking, 1 within the chimney, 2 within the base (one ready the airflow inlet and one beneath) and the ‘self-circulation system‘.
I’m going to be sincere, I don’t know what ‘self-circulation system’ is meant to imply, however I consider, it’s the very fact the coil and the airflow is inside the tank and doesn’t use the bottom of the mod like most pods do.
This could (and does) cease the condensation construct up within the pod connection.
Simply in case you didn’t catch that, I haven’t had any leaking or condensation construct up whereas utilizing the equipment.
Can You Actually Change The Vaporesso Swag PX80 Coil With out Shedding Juice?
Sure fairly simply. The system design isn’t solely new, it consists of the highest of the chamber transferring down to dam the liquid move while you take away a coil.
Usually these programs are spring loaded and in my expertise they get jammed every so often.
Nonetheless, Vaporesso has fully made it their very own with the pushing system, which means it doesn’t want a spring and it additionally doesn’t get jammed.
That is a type of programs that want precision to work completely, too tight and it’s stiff, too unfastened and it’s virtually pointless, so how did the Vaporesso Swag PX80 get on?
It labored properly, I did discover, should you take away the coil and put the pod upright, should you hold working your finger alongside the underside there’s a very sluggish leak.
Nonetheless the system isn’t designed for that, it’s designed to forestall e-liquid popping out while you take away a coil, and it really works, completely each time.
Reality be informed even when it didn’t work, the move holes are pretty small, so so long as you retain the system the other way up the overwhelming majority of your liquid can be protected.
To summarise, sure it really works however it’s not fully tight, so should you depart it upright and not using a coil in for a couple of minutes it’s possible you’ll discover you get a slight leakage.
Execs
- Adjustable airflow
- No Leaking
- Feels sturdy
- Exterior battery and 2A USB-C
- Good / Simple Battery Cap
- Sturdy Connection
- Simple To Fill and Change Coil
- Easy and Simple To make use of
Cons
- Not the perfect DTL Flavours
Closing Overview Verdict
I find it irresistible, I actually do.
I do know the GTX coils are main well-liked so this shall be a bit controversial however in all honesty the let down for me was the coils.
The 2 coils Vaporesso despatched me further (0.6ohm and 0.8ohm) have been good at MTL however DTL was a significant draw back for me.
The 0.2ohm coil was OK for the facility it makes use of, however the 0.3ohm coil was simply disappointing.
The nerd aspect of me loves the embedded display screen and all the factor has been rather well designed and constructed.
It’s straightforward to make use of and can be nice for starters or somebody searching for a little bit equipment with an exterior battery.
I simply don’t suppose cloud chasers or flavour chasers would take pleasure in it.
